Aug. 13, 2025
Treatment Indication
When the user turns on the device, a red symbol will display in the upper left hand corner of the display screen. When the user presses the On/Off button, the treatment will begin and the symbol will blink on and off.
If the symbol blinking is orange, this means that the device is working correctly and the treatment is active.If the symbol blinking is red, this means there is a poor connection and the treatment is not active. To ensure a strong connection, please apply a small amount of conducting solution such as gel or water to the pads and try again.
Voltage Frequency and Power Adjustments
By pressing the "Mode" button, the user can choose between the treatment frequency (shown as "Hz" on the display screen) and treatment power intensity (shown as "it" on the display screen). When "Hz" is selected (Frequency), you can then press the 'Power +'and 'Power -' buttons to increase or decrease the frequency level. When 'I' is selected, you can then press the 'Power +'and 'Power -' buttons to increase or decrease the power intensity (Voltage) of the treatment. You can adjust each level independently, to find the combination that suits you the best from 36 different variations.(l.e-Frequency level 1, Power level 5)
Please note - excessive use of the device set to a high power level may cause the user to feel dizzy or nauseous. If this occurs, please reduce the power level.
